...
Turn On Each Web Service Message
Configure each message (Name Id Extract and Hedge Transaction Extract)
...
Select the Name ID Extract and the following screen for the Name Id Extract Configuration displays
...
For Name Id Extract:
Set the Status to Active
Set the Integration Interval (For real-time sending of transactions, set the interval to blank minutes)
Set the Last Date/Time (to start sending new changes as of that date/time). If you provide a file to RJO to bulk-load the initial set of Name IDs into Hrvyst Hedge, then this should be the date/time that you created the file out of AGRIS.
The only Name/Address information that will automatically be sent to Hrvyst Hedge will be Name Id, Name, Address Line 1, Address Line 2, City, State, Zip, Country, Phone Number, Active Status.
If you want the customer’s Email address to also be sent to Hrvyst Hedge, set Contact Detail = “Y”.
For all other detail options, leave them set to “N”.
Select OK to save your settings.
For Hedge Transaction Extract:
Set the Status to Active
Set the Integration Interval (For real-time sending of transactions, set the interval to blank minutes)
Set the Set up the Extract Filters
Filters can be designated by Commodity, by Name Id Type, and by Location. It is important to set up the Name Id Type filter so that only the Grain Customer information is sent to RJO Hrvyst Hedge.
Select the line for Name Id Types, and then check each Name Id Type that should be able to have contracts created for them in Hrvyst Hedge.
It is important that all growers that use MyGrower should be included in these Name Id Types as well.
Select Continue to save your choices, and then Save/Exit to save the Extract filter.
You can filter the Hedge Transactions that will be sent to Hrvyst Hedge by Location and by Commodity as well. If you don’t set up any filters, then transactions from all locations and all commodities will be sent to RJO Hrvyst Hedge.
Configure each message (Name Id Extract and Hedge Transaction Extract)
...
Select the Name ID Extract and the following screen for the Name Id Extract Configuration displays
...
For Name Id Extract:
Set the Last Date/Time (to start sending new changes as of that date/time). If you want to send Hedge Transactions that will occur starting now, then set the starting date/time to be right now. If you leave this date/time to be sometime in the past, then all hedge transactions from that date forward will be sent to Hrvyst Hedge.
The Hedge Transactions that will be sent to Hrvyst Hedge will be Spot Contract applications, Cancel Contract transactions (under-fills), and over-filled contracts when they become priced.
Select OK to save your settings.
Set up the Extract Filters
Filters can be designated by Commodity, by Name Id Type, and by Location. It is important to set up the Name Id Type filter so that only the Grain Customer information is sent to RJO Hrvyst Hedge.
...
Select the line for Name Id Types, and then check each Name Id Type that should be able to have contracts created for them in Hrvyst Hedge.
...
It is important that all growers that use MyGrower should be included in these Name Id Types as well.
...
Select Continue to save your choices, and then Save/Exit to save the Extract filter.
...
Set the Status to Active (WARNING)
Any names that update since this date will be sent.. It is recommended to wait till you have confirmed integration success before setting the date back significantly.
First test should always be for today’s date and edit a name before sending all names.
Set the Integration Interval (For real-time sending of transactions, set the interval to blank minutes)
The only Name/Address information that will automatically be sent to Hrvyst Hedge will be Name Id, Name, Address Line 1, Address Line 2, City, State, Zip, Country, Phone Number, Active Status.
If you want the customer’s Email address to also be sent to Hrvyst Hedge, set Contact Detail = “Y”.
For all other detail options, leave them set to “N”.
Select OK to save your settings.
For Hedge Transaction Extract:
Set the Last Date/Time (to start sending new changes as of that date/time). Set the starting date/time to be right now. Do not backdate this date!!!!!!!!
Past transactions will fail when sending to Harvyst
It will tie up processing until complete
It will slow processing for others
You can't stop it sending if you start (it will send them all)
Past transactions don’t add value
You just made the implementation take alot longer if sending past transactions to Harvyst,
Set the Integration Interval (For real-time sending of transactions, set the interval to blank minutes)
Set the Status to Active
The Hedge Transactions that will be sent to Hrvyst Hedge will be Spot Contract applications, Cancel Contract transactions (under-fills), and over-filled contracts when they become priced.
Select OK to save your settings.
Monitor the RJO Integration
...
The display above will show the status of the CFT Service and the Transaction Service (SOGE Agent).
When you click the start/stop button, it will add the integration to the service and start the integration.
The AGRIS User who clicks the Start button above will be the User ID associated with all transactions extracted from AGRIS and sent to RJO Hrvyst Hedge.
Make sure you have enabled both message types prior to starting the service.
Communication Inquiry
CFT ->Communications ->AGRIS Web Service->Communication Inquiry - > RJO
...