AGRIS^™ Product Suite  |  System Requirements  |  Version 17.4.0 

800.366.2474  |  Mysupport@culturatech.com

...

Table of Contents
minLevel 2

Anchor
_Toc272398698 _Toc272398698

Anchor
_Toc477765423 _Toc477765423

1. Introduction

This document details the hardware and supporting software required for the Cultura Technologies, LLC agribusiness management system, AGRIS Product Suite 17.4.0, including the AgroGuide™ and oneWeigh™ systems. This document contains subsections for each configuration supported by AGRIS 17.4.0.
For information regarding AGRIS on Microsoft SQL Server, please refer to the documentation here: AGRIS on Microsoft SQL Server (MSSQL)
NOTE: AGRIS 17.4.0 is ONLY supported on the following operating systems:

• Windows Server® 2016 Standard
• Windows Server® 2012 R2 Standard
• Windows Server® 2008 R2 Standard SP1
• Windows® 10 Professional (32- and 64-bit)
• Windows® 8.1 Professional (32- and 64-bit)
• Windows® 7 Professional SP1 (32- and 64-bit)

Anchor
_Toc272398699 _Toc272398699

Anchor
_Toc477765424 _Toc477765424

1.1 Summary of Major System Requirements Changes

The following table summarizes the major hardware (HW) and software (SW) requirements changes related to the maintenance and support of AGRIS 17.4.0 (compared to the previous version).

Anchor
_AGRIS_10.0.0.0_Standalone _AGRIS_10.0.0.0_Standalone

Anchor
_Toc272398701 _Toc272398701

Anchor
_Toc477765425 _Toc477765425

2. AGRIS 17.4.0 Standalone Application

This section describes the hardware and supporting software required for AGRIS 17.4.0 in a standalone workstation operation. In this configuration, you install and start the AGRIS 17.4.0 components and al

Anchor
_GoBack _GoBack

l supporting software on a single workstation. All hardware and supporting software must be installed and operational before you install AGRIS 17.4.0.

Anchor
_Toc272398702 _Toc272398702

Anchor
_Toc477765426 _Toc477765426

2.1 Hardware Requirements

The following table lists the minimum and recommended hardware configuration required for AGRIS 17.4.0 operating in a stand-alone environment.

Anchor
_Toc272398703 _Toc272398703

Anchor
_Toc477765427 _Toc477765427

2.2 Supporting Software Requirements

The following table lists the supporting software required to operate AGRIS 17.4.0 in a stand-alone environment.

...

*Loaded as part of the AGRIS 17.4.0 installation.
**A software framework containing a library of coded solutions to common programming problems and a virtual machine that manages the execution of programs written specifically for the framework.

Anchor
_Toc272398704 _Toc272398704

Anchor
_Toc477765428 _Toc477765428

3. AGRIS Network Configuration

This section describes the hardware and supporting software required for AGRIS 17.4.0 in a Local Area Network (LAN) environment.
In this configuration:

...

All hardware and supporting software must be installed and operational before you install AGRIS 17.4.0.
NOTE: Contact Cultura Technologies, LLC for information on Component Server(s) for individual database servers that exceed 200 users.

Anchor
_Toc272398705 _Toc272398705

Anchor
_Toc477765429 _Toc477765429

3.1 Database Server

Use the information in this section to identify the database server hardware requirements for the number of users, and the software required to support AGRIS in that environment.

Anchor
_Toc272398706 _Toc272398706

Anchor
_Toc477765430 _Toc477765430

3.1.1 Hardware Requirements

The following table lists the minimum hardware configuration required for AGRIS 17.4.0 in a Microsoft Windows® network environment.

...

NOTE: RAM for the database is based on the size of concurrent data files in use.

Anchor
_Toc272398707 _Toc272398707

Anchor
_Toc477765431 _Toc477765431

3.1.2 Supporting Software Requirements

The following table lists the supporting software required to operate AGRIS 17.4.0 in a Microsoft Windows® network environment.

...

**A software framework containing a library of coded solutions to common programming problems and a virtual machine that manages the execution of programs written specifically for the framework.

Anchor
_Toc272398708 _Toc272398708

Anchor
_Toc477765432 _Toc477765432

3.2 Client Workstations

Use the information in this section to identify the hardware needed to support your client workstations and the software required to run AGRIS.

Anchor
_Toc272398709 _Toc272398709

Anchor
_Toc477765433 _Toc477765433

3.2.1 Hardware Requirements

The following table lists the minimum hardware configuration required for AGRIS 17.4.0 in a Microsoft Windows® network environment.

...

*When using AGRIS with MSSQL, the AGRIS client operations can consume on average 240-275 mb of RAM.   Based on operating system and usage Ram usage can be as high as 500MB for certain operations.  It is highly recommended to use clients with 4GB or greater when using AGRIS with MSSQL.  

Anchor
_Toc272398710 _Toc272398710

Anchor
_Toc477765434 _Toc477765434

3.2.2 Supporting Software Requirements

The following table lists the supporting software required to operate AGRIS 17.4.0 in a Microsoft Windows® network environment.

...

*Loaded as part of the AGRIS 17.4.0 installation.
**A software framework containing a library of coded solutions to common programming problems and a virtual machine that manages the execution of programs written specifically for the framework.

Anchor
_Toc272398711 _Toc272398711

Anchor
_Toc477765435 _Toc477765435

3.3 AGRIS 17.4.0 Terminal Server Configuration

This section identifies the hardware and supporting software required to run AGRIS 17.4.0 on Windows Terminal Server. Terminal Server is required for clients with slower than 100Mb-connectivity. These servers are most commonly used in cases where remote locations require access to data that resides at the main site. In this configuration, install AGRIS 17.4.0 components on the terminal server, and then install and start all other supporting software (for example, server components, database engine, datasets, and so on) on a separate network server.
Workstations access the client components on the terminal server using the Microsoft Remote Desktop Protocol (RDP) client.
Install all hardware and supporting software before you install AGRIS 17.4.0.
Refer to the applicable server hardware requirements, detailed in section 3.1, Database Server, for the appropriate database server configuration (for example, server components, database engine, datasets, and so on).
Requirements for Terminal Server Clients
Use the specific installation requirements of the terminal server client software vendor. Clients should be members of the Active Directory® domain for optimal printer configuration in AGRIS 17.4.0.

Anchor
_Toc272398716 _Toc272398716

Anchor
_Toc477765436 _Toc477765436

3.3.1 Windows Server® 2008 R2 SP1

Anchor
_Toc272398717 _Toc272398717

Anchor
_Toc477765437 _Toc477765437

Hardware Requirements
The following table lists the minimum hardware configuration required for AGRIS 17.4.0 to operate in a terminal server environment.

...

*See section 5.4 for details on the Terminal Server Client printing environment

Anchor
_Toc272398719 _Toc272398719

**The Citrix® Virtual Memory Optimization service should be disabled on servers with AGRIS.

***A software framework containing a library of coded solutions to common programming problems and a virtual machine that manages the execution of programs written specifically for the framework.

Anchor
_Toc477765439 _Toc477765439

3.3.2 Windows Server® 2012 R2

Anchor
_Toc477765440 _Toc477765440

Hardware Requirements
The following table lists the minimum hardware configuration required for AGRIS 17.4.0 to operate in a terminal server environment.

...

*See section 5.4 for details on the Terminal Server Client printing environment
**The Citrix® Virtual Memory Optimization service should be disabled on servers with AGRIS.

***A software framework containing a library of coded solutions to common programming problems and a virtual machine that manages the execution of programs written specifically for the framework.

Anchor
_Toc477765442 _Toc477765442

3.3.3 Windows Server® 2016

Anchor
_Toc477765443 _Toc477765443

Hardware Requirements
The following table lists the minimum hardware configuration required for AGRIS 17.4.0 to operate in a terminal server environment.

...

*See section 5.4 for details on the Terminal Server Client printing environment

**A software framework containing a library of coded solutions to common programming problems and a virtual machine that manages the execution of programs written specifically for the framework.

Anchor
_Toc272398720 _Toc272398720

Anchor
_Toc477765445 _Toc477765445

4. AGRIS Operating System / Database Support Matrix

The following table lists the combinations of operating systems and databases for AGRIS.
"Yes" indicates a supported configuration.
"No" indicates an unsupported configuration.

...

*Support of the AGRIS system on the PSQL v11 database engine ended July 1, 2016.  While this configuration was tested on earlier releases and changes in this release should not impact support of this configuration, no testing was done on this. If you have issues with this configuration, you may need to upgrade to PSQL v12 or MSSQL 2016 SP1.

Anchor
_Toc477765446 _Toc477765446

5. Printing

This section describes the printer capabilities necessary to print from AGRIS 17.4.0. Please consult with the printer manufacturer to determine if a specific model printer meets your printing requirements.

Anchor
_Toc272398721 _Toc272398721

Anchor
_Toc477765447 _Toc477765447

5.1 AGRIS Text Drivers

When using AGRIS text drivers with laser or inkjet printers, you should use the PCL print drivers for optimum results.

Anchor
_Toc272398722 _Toc272398722

Anchor
_Toc477765448 _Toc477765448

5.2 Laser Printers

Cultura Technologies, LLC recommends that laser printers use a Windows-native driver.
AGRIS 17.4.0 does not support the use of multifunction (scanner/copier/fax/printer) laser printers.
Text-based printing features in AGRIS 17.4.0 require a laser printer capable of printing at least 66 lines per page.

Anchor
_Toc272398723 _Toc272398723

Anchor
_Toc477765449 _Toc477765449

5.3 Dot-Matrix Printers

Cultura Technologies, LLC recommends that all dot-matrix printers be of the 24-pin impact type and capable of running in Epson® emulation.
Graphical forms, graphical reports, and the AgroGuide™ system do not support printing to dot-matrix printers.

Anchor
_Terminal_Server_Client _Terminal_Server_Client

Anchor
_Toc272398724 _Toc272398724

Anchor
_Toc477765450 _Toc477765450

5.4 Terminal Server Client Printing

Cultura Technologies, LLC recommends that you disable client auto-printer creation. Printer setup, known as System Printers 1, 2 and 3 in a Terminal Server environment, is inconsistent when using automatically created printers that contain a session number.
To manually connect printers, access them from within RDP.
For optimal printer performance, ensure your client workstations are members of the Active Directory domain.
Please consult the printer manufacturer documentation for printer model compatibility with Terminal Services. You also can refer to the knowledgebase article "Printing and Windows Terminal Server" HERE.

Anchor
_Toc272398725 _Toc272398725

Anchor
_Toc477765451 _Toc477765451

6. Special Considerations

This section provides information regarding environments where additional business management packages from Cultura Technologies, LLC and others are part of your application landscape.

Anchor
_Toc272398726 _Toc272398726

Anchor
_Toc477765452 _Toc477765452

6.1 AgroGuide™ Agronomy Management System

When running AgroGuide with graphic intensive application components (maps, images, and so on) in a WAN environment, an ICA client connected to a Citrix Server retrieves images faster than an RDP client connected to a Terminal Server.
In a LAN environment, ICA and RDP connections retrieve images at the same rates.
The AgroGuide System requires:

• • A laser or inkjet printer.
  • A DVD Drive to load Topologically Integrated Geographic Encoding and Reference (TIGER) data (field maps) for use in the AgroGuide system. Field maps are loaded and installed on all AgroGuide system computers.
  • 1.0GB minimum free disk space per color image file (per County).
  • 250MB minimum free disk space per monochrome image file (per County).
  • A Color Depth setting of 24-bit or higher for displaying field maps.

Anchor
_Toc272398727 _Toc272398727

Anchor
_Toc477765453 _Toc477765453

6.2 binSight™ Bin Management System

Please refer to the binSight v2.8 System Requirements document for a list of supported operating systems and further compatibility information.
The binSight system server application must reside on a separate machine from:

• • Connect2™ AIP application
  • Fuel Connect™ AIP
  • Store Manager™ ES AIP

Anchor
_Toc272398728 _Toc272398728

Anchor
_Toc477765454 _Toc477765454

6.3 Connect2™ Interface

The Connect2 Interface extended option requires a live connection to the internet. Connect2 interface AIP application must reside on a separate machine from:

• • binSight system server
  • Fuel Connect system AIP
  • Store Manager ES system AIP

Anchor
_Toc272398729 _Toc272398729

Anchor
_Toc477765455 _Toc477765455

6.4 Fuel Connect™ System

As of the release date of AGRIS 17.4.0, Fuel Connect does not run on Windows Server 2008® operating systems. Please refer to the Requirements section of the Fuel Connect Readme document for a list of supported operating systems and further compatibility information.
The Fuel Connect System AIP application must reside on a separate machine from:

• • binSight system server
  • Connect2 system AIP
  • Store Manager ES system AIP

Anchor
_Toc272398730 _Toc272398730

Anchor
_Toc477765456 _Toc477765456

6.5 iView™ Adapter

Please refer to the iView System Requirements document for a list of supported operating systems and further compatibility information.

Anchor
_Toc272398731 _Toc272398731

Anchor
_Toc477765457 _Toc477765457

6.6 oneWeigh™

Please refer to the applicable Standalone Application system requirements, detailed in section the Standalone Application, for the appropriate configuration information.

Anchor
_Toc477765458 _Toc477765458

6.7 RetailWise™ Point-of-Sale System

The RetailWise Point-of-Sale system and integration platform has not been tested nor supported for AGRIS 10.0.0 or higher versions.  Please contact your account manager or agris.support@culturatech.com or 800-366-2474 to discuss your upgrade migration plan to the Store Manager ES™ Point-of-Sale System.

Anchor
_Toc272398733 _Toc272398733

Anchor
_Toc477765459 _Toc477765459

6.8 Other Software

Use of Adobe® Portable Document Format™ (PDF) capabilities in AGRIS 17.4.0 requires installation of a PDF reader.
Use of Microsoft Excel® capabilities in AGRIS 17.4.0 requires installation of Excel.
Use of HTML document capabilities in AGRIS 17.4.0 requires installation of a browser such as Microsoft Internet Explorer®.

Anchor
_Toc477765460 _Toc477765460

6.9 Bar Code Scanner

Based on customer feedback, the recommended bar code scanner for use with AGRIS is the Motorola LS4278.

Anchor
_Toc477765461 _Toc477765461

6.10 Printing the Help-About Report on Windows® 10 32-bit

Printing the AGRIS Help-About report on Windows® 10 32-bit requires enabling the Windows® NTVDM feature. Printing the Help-About report in AGRIS may prompt to install this feature. You can also install this feature with these steps:

...