Page Comparison

← Back to Technical Info page

...

For Agris

...

21.1.

...

0 please note: It may be best to use the Edge or Internet Explorer browser as the Chrome browser may block the links.

Introduction

Purpose

The Installation Instructions assist you in performing new software installations of the AGRIS System Version 2021.31.0 software. Also use these instructions to upgrade AGRIS System Version 9.5.0 to this new version.
For information regarding running AGRIS on Microsoft SQL Server, please refer to the documentation here: AGRIS on Microsoft SQL Server

...

The following table summarizes the major hardware (HW) and software (SW) requirements changes relating to the maintenance and support of AGRIS 2021.31.0 (compared to the previous release of AGRIS).

...

RetailWise customers cannot upgrade directly to AGRIS 2021.31.0 and must coordinate their upgrade to Store Manager ES and AGRIS 2021.31.0 with the Sales Team (800-393-0075). The AGRIS Integration Platform (AIP) for RetailWise, which is translates data between RetailWise and AGRIS, is not supported in AGRIS 9.5.0.7 and higher. Note that customers already running Store Manager ES are not impacted by this and are able to upgrade to AGRIS 2021.31.0.

Tips for Minimizing Downtime During the Installation

...

Greenstone provides support to all subscribing users of the AGRIS System Version 2021.31.0. You can contact our Technical Assistance Center in the following ways:
Email:  Mysupport@culturatech.com
Phone:  (800) 366-2474
Mail:  3820 Mansell Road, Suite 375. Alpharetta, GA 30022
Website:  http://www.greenstonesystems.com/
Knowledge Base https://culturana.force.com/s/login

...

1. 1. 1. Create a network share (Example: \\servername\apps\AGRISDIST). All users need Read permissions to this share.
      2. The network administrator should save all the installation files to this share.
      3. If an update is available (update.exe), it should be copied to the same folder that contains the setup.exe, which was created in the previous step.
      4. Install AGRIS Version 20.3.0 or later on all AGRIS servers, for example, component servers, database servers, etc. Also, apply updates, if they exist, for example, update.exe.
      5. Install AGRIS Version 20.3.0 or later on all your AGRIS workstations. The AGRIS clients are now ready to detect updates from your servers. When you receive an update from AGRIS, you only have to update your Component Server(s) and application server(s). If you have not specifically set up a Component Server(s), then we assume the database server is the Component Server.

AGRIS

...

21.

...

1.0 Network Installation

Installation Checklist

Print this checklist to assist you in installing AGRIS 2021.31.0.

...

Please consult the AGRIS Version 2021.31.0 System Requirements document before proceeding with the install. Please verify that all computers meet or exceed the minimum system requirements.
Note: The AGRIS installation will fail if minimum system requirements are not met.

...

1. Stop the Auto Blender services.
2. If you have not already done so, convert your first dataset to AGRIS 2021.31.0.
3. From the AGRIS Main Menu, select AGY >> General Setup >> Automated Controls to display the Automated Blender Setup window.
   

   
   The Automated Blender Setup Window

4. For each Auto Blender:
   1. Click the button to the right of the Auto Blender field to select an automated blender from the list.
   2. Click the button to the right of the AGRIS User field to select a user from the list. Be sure to select an AGRIS user with password permissions set to Never Expire.
   3. Click Apply to apply the changes.
5. When you finish assigning users, click OK to close the Automated Blender Setup window.
6. Restart the Auto Blender services.

Downloading the AGRIS

...

21.

...

1.0 Installation Program

1. From the console of the server or standalone unit, click Start >> Run…
2. Type  https://culturana.force.com/  >> click OK.  (NOTE: It may be best to use the Edge or Internet Explorer browser as the Chrome browser may block the links).
3. Log on to the website
   1. If you are not already signed up for a user account, you can click the "Register" link to sign up. Account applications are reviewed and approved within 8 business hours.
4. Click search for the AGRIS 2021.31.0 is Available Article and the Download setup.exe link for AGRIS 2021.31.0.
5. Click Save when the "Do you want to run or save this file?" message displays.
6. On the left side of the window, click Desktop, and then click Save on the bottom, right side to download the update (which may take a few minutes).
7. WARNING: Due to enhanced security features in Windows, please ensure that the installer is unblocked prior to installation using the following steps:
   1. Right-click on the downloaded installation file and click Properties
   2. At the bottom of the General tab, look for a button that says "Unblock"
      1. If the button exists, click Unblock and then click OK
      2. If the button does not exist, click Cancel
8. If necessary, you can request an AGRIS 2021.31.0 CD from the Technical Assistance Center (800-366-2474) or by emailing Mysupport@culturatech.com.

...

This section describes how to install the AGRIS System Version 2021.31.0 software in the supported configurations listed in the AGRIS System Requirements document. It assumes that all hardware and supporting software requirements are in place and operational.
The following prerequisites must be satisfied:

...

Note: The existing version of the AGRIS System must be version 9.5.0 or higher. No earlier versions of the software can be directly upgraded to Version 2021.31.0.

• • Ensure that you have a complete backup of your current version's software and data.
  • Purge any unnecessary data files to enhance dataset conversion performance.

...

Citrix Server/Terminal Server Installation

Anchor
_Toc158618014 _Toc158618014

Anchor
_Ref190154932 _Ref190154932

Anchor
_Ref190154936 _Ref190154936

Anchor
_Toc478039010 _Toc478039010

AGRIS

...

21.

...

1.0 Citrix Server/Terminal Server Installation checklist

Install components in the following order based on the application server software being used:

Anchor
_Ref88362347 _Ref88362347

Anchor
_Toc158618015 _Toc158618015

Anchor
_Toc478039011 _Toc478039011

Installing AGRIS

...

21.

...

1.0 Server on Citrix Server/Terminal Server

1. Log all users out of the Citrix/Terminal Server(s) and prevent additional users from logging on while installing AGRIS.
2. Close all other applications and restart the server.
3. Install a supported version of Pervasive® PSQL™ using the instructions available on the AGRIS Customer Portal site:
   https://culturana.force.com/s/article/ka036000000oLocAAE/AGRIS-Installing-Actian-PSQL-v12-SP1-and-Update-3?r=1 * = NOTE: It may be best to use the Edge or Internet Explorer browser as the Chrome browser may block the above links.
4. Complete section 3.2 to install AGRIS.
5. Manually set the AGRIS data path - see Section 13.1 for additional information.
6. Save the AGRIS data path and restart the server.

...

Anchor
_Install_Pervasive_Client_Engine _Install_Pervasive_Client_Engine

Anchor
_Toc6991042 _Toc6991042

Anchor
_Ref188851585 _Ref188851585

Anchor
_Ref188851602 _Ref188851602

Anchor
_Ref188937111 _Ref188937111

Anchor
_Toc478039015 _Toc478039015

AGRIS

...

21.

...

1.0 Client Installation Procedure

IMPORTANT:Before installing the AGRIS Client, install a supported version of Pervasive® PSQL™ on the client workstation using the instructions available at; at  
https://culturana.force.com/s/article/ka036000000oLocAAE/AGRIS-Installing-Actian-PSQL-v12-SP1-and-Update-3?r=1

...

Anchor
_Toc478039021 _Toc478039021

AGRIS

...

21.

...

1.0 Standalone Installation

• Installing the .NET Framework:
  • For Windows 8.1 and Windows 10, part of the.NET Framework must be installed through the Programs and Features:
    • Click Start and type "Programs and Features", then click on the Programs and Features.
    • Click on the Turn Windows Features on or off link.
    • Checkmark the .NET Framework 3.5 (includes .NET 2.0 and 3.0) checkbox
    • Click OK to start the installation
    • Once the installation is complete, click Close
    • Close the Programs and Features
    • Proceed with the next step in the AGRIS installation.
  • For all other supported standalone operating systems, there are no extra steps for the .NET Framework.

...

If you are converting from earlier versions of the AGRIS Business System to Version 2021.31.0, this is a simple process.

...

Anchor
_Converting_from_Agris_1 _Converting_from_Agris_1

Anchor
_Toc6991049 _Toc6991049

Anchor
_Toc478039024 _Toc478039024

Converting to AGRIS 20.3.0

• Launch AGRIS 2021.31.0 and the Select Dataset screen will appear.
• Choose the desired dataset and click Select.
• A window appears describing that a dataset conversion is required.

...

Use the licensing setup to set the number of user licenses for each purchased package. The licensing setup for the AGRIS Business System is located in the main system menu under Help. Use this process along with the licensing diskette that accompanies the AGRIS 2021.31.0 installation CD. Load the licensing diskette during installation or if any package licenses are upgraded.
Note:Program module icons are not present until the package is licensed for use. An access code is required during this procedure, so perform this procedure during hours when the Technical Assistance Center (800-366-2474) is available. Tell them that you are performing the license update procedure and need an access code.

...

If the current dataset has already been converted to AGRIS 2021.31.0 and this is the first time Extended Option System Default Settings have been updated, then elect to update the current dataset with the System Default Settings. Once Extended Option System Default Settings are set, they will be automatically applied to a dataset during conversion to AGRIS 20.3.0, or when a package is initialized in a dataset.

...

• • The Target command, above, shows an example of allowing the shortcut to point to an alternate agris.ini file. This is accomplished by including the "/I" parameter, followed by the drive letter and full directory path, then the name of the agris.ini file. You can also use this new parameter within a .BAT file from DOS when launching the main AGRIS menu (SysMenu.exe). You can set up multiple desktop shortcuts or batch files and use the command line parameter to access the alternate agris.ini files. The contents of the alternate agris.ini file allow access to multiple sets of "dataset" directory and "userprog" directories with one installation of the Version 2021.31.0 system.
  • Add the current .ini file location and current SUPPORT and USERPROG path settings. Since you can access multiple INI files, the System Information Report was enhanced to show the currently active Userprog, Support and Data paths, and the currently active agris.ini file.

...

If your datasets require reformatting as part of the upgrade to AGRIS 2021.31.0, a new validation utility now allows you to scan these datasets for errors before converting them.
When starting a Dataset Conversion during the upgrade to Version 2021.31.0, the Select Dataset window will appear.

...

The following is a list of tips, known issues, and best practices for installing or upgrading to more recent Microsoft operating systems, Pervasive® PSQL™, and AGRIS 2021.31.0.

Anchor
_Toc236729441 _Toc236729441

Anchor
_Toc267308911 _Toc267308911

Anchor
_Toc478039049 _Toc478039049

Pervasive® PSQL™

...