Adjusting the File Close Delay Setting After Upgrading to Actian Zen 15

After upgrading to Actian Zen 15, a configuration change is required to ensure Agris functions correctly. By default, the File Close Delay setting is set to 50. To maintain proper compatibility and performance with Agris, this value should be updated to 0.

Open

 Instructions

Configuring the File Close Delay setting for Actian Zen v15™

For AGRIS version 24.0.0, using Actian Zen v15™ requires the “File Close Delay” setting to be set to zero. This needs to be set on any machines running the Server or Workgroup version of Actian Zen v15™. The AGRIS installation will automatically set this to zero.  If you need to set this value manually, follow these steps:

1. open Zen Control Center on the machine where Zen 15 Server or Workgroup is installed

2. under Engines, click on the machine

3. click on Configure Local Engine

4. click on Performance tuning

5. set the File Close Delay textbox to a zero: 0

6. click Apply

7. click OK

8. close Control Center

9. reboot the machine

Screenshot of the File Close Delay setting set to zero:

 Related articles