How to set up a new location for use with AgSync - Formulation Group Setup

Owned by
Russell Shirley
Last updated: Jan 30, 2018
1 min read

When configuring a new location the AgroGuide location must have default dry and liquid blend groups configured in the following way. 

Step-by-step guide

Open AGRIS

  1. Select AgroGuide to open the menu selection. 
  2. Select Formulation Setup
  3. Select Formulation Group - Edit.
  4. Follow steps to create a new formulation group for dry and liquid blends.  
    1. Select (NEW)
    2. Set the Group ID as 
      AgSyncLLoc Example AgSyncL041   - AgSync L = Liquid blend 041 = AGRIS location number 
      or
      AgSyncDLoc Example AgSyncD041  - AgSync D = Dry blend 041 = AGRIS location 
    3. Set the Group Name as AgSync Liq 041  or AgSync Dry 041 

    4. Then select this as the default blend group for this location
    5. Press the Ok selection to continue.
    6. Repeat for each location you plan to configure with AgSync.